Logitech G700s Top Case Replacement

Written By: Chase Tisinger

Comments: 1

Difficulty

Moderate

Steps

Time Required

5 - 15 minutes

Introduction

This guide will shop you how to open the logitech G700s, this is necessary for cleaning, replacing the scroll wheel and replacing the left and right click switches.

Tools

Step 1

Remove the batteries from the mouse.
Use a plastic opening tool to peel up the four mouse feet.

Step 2

Remove the five 5.5mm Phillips #00 screws found underneath the mouse feet.

Step 3

Pull the top of the mouse off of the bottom half.
There's a wire connecting the two halves.
Unplug the programmable buttons from the motherboard.
The white pin housing on the motherboard may come off while unplugging. In that case, use tool to pry between at location indicated to separate them and insert the housing back onto the motherboard.

I able to access the scroll wheel without removing the cable. If you do that, I recommend placing some sort of object against the top half of the mouse so that it doesn't move and pull on the cable. I have fairly small hands though so you might need to unplug the cable.

Ash -