Logitech G502 Proteus Core Mouse Feet Replacement

Written By: Sage Farray
  • Comments: 1
Logitech G502 Proteus Core Mouse Feet Replacement

Difficulty

Easy

Steps

5

Time Required

10 - 15 minutes

Introduction

There may come a time when the feet of your mouse become worn or torn and you want to replace them. Follow this guide to replace the feet on your G502 Proteus Core Mouse.

The feet of your mouse needs to be intact for the mouse to be able to glide smoothly on your mouse pad. This is important for competitive games where mouse movements need to be quick and precise.

  1. NqWVWEp4boehCZJa
    NqWVWEp4boehCZJa
    EhIvkWlpxSHajDnR
    1FqdJ5ZoCGOUYF2N

    • Use your fingers or a nylon spudger to peel the old feet off all three corners where the screw holes are exposed.

  2. XkGwFjKgytlN2GPe
    XkGwFjKgytlN2GPe
    OjMiFi1aShlJAXHj
    McBJNVFSdbGhbBYj

    • Peel the backing off the new mouse feet to reveal the adhesive.

  3. BmAIRZSZkQILUFow
    BmAIRZSZkQILUFow
    bMI3iL1aurMCC6qr
    QTWZXirfBhVUrcQp

    • Apply the new mouse feet to their designated areas based on shape.

  4. m2ssZpvfNDonXXER

    • Apply even pressure across the mouse feet to ensure adherence.

  5. FUtL1X6WhVwQJ55v

    • Let adhesive sit for about 5-10 minutes with applied pressure.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sage Farray

Member since: 10/04/17

539 Reputation

One comment

You completely omitted half of the feet located on the mouse. The ones left out are the 3 located on the removable panel: there are 2 “v” shaped ones around the sensor and the one to the right of the “v” shapes.

Robert -