Introduction
Parts
-
-
In Terminal type: sudo apt-get install screen
-
sudo screen /dev/ttyUSB0 9600
-
Press ⌃A ⇧ : (at the same time). Once you see a : prompt at the bottom of the screen type
-
exec ::: /sbin/agetty -L -n 9600 ttyUSB0 vt100
-
Press return a few times on the Lisa keyboard and the login prompt should appear.
-
-
-
Type: ls /dev/cu.*
-
Copy the result that mentions USB
-
Then type the following replacing serial with the previous result: screen /dev/serial 9600
-
Press ⌃A ⇧:
-
When the : prompt appears type
-
exec ::: /usr/libexec/getty std.9600
-
-
-
Open LisaTerminal and set the settings to baud rate 9600 and set serial port to A.
-
Plug the serial cable into serial port A.
-
In MacWorks Plus and Macintosh System 6, the application Mac240 supports graphics and is generally fantastic for this type of connection.
-
Mac240 can be acquired from Macintosh Garden.
-
-
-
This was done so I could use mutt for email and w3m for web browsing
-
mpg123 is great for music if your connected computer has speakers.
-