Lighting - Advanced

Written By: Nick

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

IF YOU HAVE OVEREXPOSURE ISSUES, reduce the exposure comp by -0.5, up to -1.0; additional corrections should be made in post. Look for 5000-5500k LED panels unless you set a custom WB or know to correct the blue tint 6000-6500k panels produce.
If you are on a tight budget, look for lights with a tripod mount. Many low-cost video lights favor a tripod mount over light stands.
Budget lights
If you are on a limited budget, look for lights with a tripod mount like the SmallRig lights, as well as others like the Meike Y600/700 lights. Most budget lights use a tripod mount so a $10-15 tripod can be used rather than a light stand.
Professional lights
Some lights like Genarary LED panels meant for professional use often favor/require light stands are either not designed for tripod mounts, or it is an afterthought. While many "work" on tripods, it is often an afterthought.
If you get a good deal on these lights from a surplus sale (or have the budget), many of these work significantly better than "budget" lights. However, this comes at the price: you may pay significantly more, or they require a dedicated light stand if they do not mount to a standard tripod.

If you use a flexible tripod as shown in the 3rd photo for the "fixed" light, the tripod may suddenly fail. The best way to avoid this is to use a proper articularing arm or desk clamp.
Your lighting setup will likely vary based on how you setup your photo background. In general, one light should be "fixed" with the other light being flexible.
Tripod mount
For best results, use a specialized clamp for side lights, or a tilting tripod.
Place your light(s) on an angle that will minimize reflections. NOTE: While the tripod light will need frequent adjustment, the side light should be mounted where adjustment needs are minimized.
Light stand mounted lights
These lights require a dedicated light stand unless a tripod mount is available. Light adjustment is generally done on the light frame.
Install the light on the stand from a flat angle; these are adjusted on the light frame. Once mounted, make any final adjustments you want and "lock" the panel in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 11/11/09

88431 Reputation