Introduction
-
-
Slide a plastic opening tool underneath the back case near the screen hinges. Gently pry up on either side.
-
Slide the opening tool underneath the back case next to the middle screw hole at either side of the case. Gently pry up.
-
-
-
Remove the back case by pulling up near the screen hinges and lifting diagonally away from the laptop.
-
-
-
Remove the four M2 screws fastening the battery to the case
-
Gently pull out the battery and put it aside.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.