Introduction
Use this guide to remove or replace the battery in your Lenovo Ideapad 5 15ITL05.
-
-
Use a T5 Torx driver to remove nine screws securing the back cover.
-
The three screws on the hinge side will be longer.
-
-
-
The back cover is held on by plastic tabs around the entire perimeter of the cover.
-
Use plastic pry tools at the seam. I like to start near the hinge.
-
-
-
Use the flat end of a spudger to push the square tab on the battery connector and slide it out of its socket.
-
-
-
Use a Phillips screwdriver to remove the four screws securing the battery.
-
Note: Two of the screws on the left in the image will also hold in the SATA drive bracket.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
