Introduction

Use this guide to remove or replace the back (bottom) cover on your Lenovo Ideapad 5 15ITL05

  1. G1BTpHPnPKZcCHsV
    G1BTpHPnPKZcCHsV
    SmGJLNdHYKrphxRZ
    • Use a T5 Torx driver to remove nine screws securing the back cover.

    • The three screws on the hinge side will be longer.

  2. 2YjxSWQbHEpLvJtd
    2YjxSWQbHEpLvJtd
    2uRgqD5jiNhTkICI
    qhTflN1G5TIesPPO
    • The back cover is held on by plastic tabs around the entire perimeter of the cover.

    • Use plastic pry tools at the seam. I like to start near the hinge.

  3. CgwnPtdyNdqEy6Q4
    CgwnPtdyNdqEy6Q4
    ERSg6emsQZyfvbCr
    • Once all the tabs are loose, you will be able to remove the cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

E N

Member since: 21/11/22

422 Reputation

One comment

I would call that the bottom cover. I want to see the back cover of the screen replaced. Including the electronics attached to it!

Bruce Cox -