Introduction
-
-
Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.
-
-
-
Use the plastic prying tools to crack open the back of the device.
-
Once cracked, use more plastic prying tools to fully remove the back panel. A popping noise will occur when each clip is opened.
-
Remove the back panel and set aside.
-
-
-
The battery pack is glued to the device.
-
Use a spudger to pry the battery pack from the glue.
-
Desolder the positive (red) and negative (black) power leads.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
