Introduction

If your watch does not power on after being on the charging station for about an hour the battery needs to be replaced.

  1. vjSjoWNO4egJZRow
    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

    Is there a reason you are removing the straps before the back of the watch? They don't block the back from coming off or really get in the way much.

    Andy Wickham -

    its in the way, obviously it need to take them off, lol.

    silentg4real -

    Where can I get this battery?

    Josh Wheat -

    where can i buy a new replacement rear case? please let me know!

    silentg4real -

    I'd like to know as well and don't care if it's a knock off either

    Joseph Wellman -

  2. iBUEiVmqQ14LVUpH
    iBUEiVmqQ14LVUpH
    nMegXjBsCEGsuoWX
    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

  3. FRYHDHHkoNWpHhai
    • Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.

  4. pQubB2Gx5oIuvRcd
    pQubB2Gx5oIuvRcd
    cJmdE2u4RGy53rJB
    • Slide the opening pick between the rear case and the rest of the device to separate the two halves.

    • Gently pull the two halves apart.

  5. PrckJ4DSIMAtBKsO
    PrckJ4DSIMAtBKsO
    JsP2rV1FOCScFfNh
    • Remove the two black Phillips #000 2.5x3mm screws that are located on the right side of the metal clip.

    There is only one black screw… the other black dot is the reset button extension.

    David “NOeVoting” Glaude -

  6. KesYd4WZY6IEIreT
    • Use a pair of tweezers to gently lift the metal retaining clip up and out of the way.

  7. obYorTgVZ3ZOZlp4
    obYorTgVZ3ZOZlp4
    S1lpSNkXFpsntrdF
    • Use a spudger to gently pry the battery up from the rear case.

    • The battery is attached with a small amount of adhesive, so some force may be required.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Deja Miller

Member since: 14/10/14

462 Reputation

4 comments

Hello where can i buy the battery and the tools to perform this function. Also I love my lg watch and I get 3 days before needing a recharge but, i do not play with it and do not add all the fancy watch faces either. just look at text messages and see who is calling. I think its the best out there only draw back is the cradle charger. please email me. buckeybandit69@gmail.com.

thank you..

Brian Adams -

where can i but the battery

bikerdennis321 -

I know how to change but where can i buy the battery for this watch//

bikerdennis321 -

I had mine on eBay. Search for LG W100KT 400mAh Battery-BL-S1

It works perfectly till now.

MrPatate -