Kyvol Cybovac L20 Main Brush Replacement

Written By: CorderoJones
  • Comments: 0
Kyvol Cybovac L20 Main Brush Replacement

Difficulty

Very easy

Steps

3

Time Required

40 seconds

Introduction

The Kyvol Cybovac L20 has a Main Brush that may stop working over time from use. You should try cleaning off the main brush if it stops working. If that doesn't work, then you will need to replace it. Before doing any work on it, the Kyvol Cybovac L20 should be turned off.

  1. CtC2uVnKPnJmqcHv

    • Turn over the Kyvol L20 Cybovac on a flat surface.

  2. IsrOVw3qAVZHl2J2

    • Take off the orange cover guarding the brush.

    • The orange cover has screws in it. You do not need to take out these screws to take off the cover.

  3. MAcutLEKQKcnuTWx

    • Grip and remove the brush.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

CorderoJones

Member since: 12/09/23

305 Reputation

0 comments