Introduction
Kyvol supplied the Cybovac L20 with a 3200mAh lithium-ion rechargeable battery. This guide should be useful for sufficient battery repairs if:
- The battery will not charge.
- The battery doesn’t stay charged.
- The device doesn’t turn on.
Tools
-
-
Use a Phillips #1 screwdriver to remove two 1 mm screws that secure the panel.
-
Remove the battery panel.
-
-
-
Slightly lift the battery out of the compartment.
-
Disconnect the battery connector.
-
Completely remove the battery.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
