Konica Minolta DiMAGE Z3 SD Memory Card Replacement

Written By: Hieu Ngo
  • Comments: 0
Konica Minolta DiMAGE Z3 SD Memory Card Replacement

Difficulty

Easy

Steps

4

Time Required

1 minute

Introduction

The SD Memory Card must be inserted for the camera to function. If a card has not been inserted, a "no-card" warning is displayed on the LCD monitor when the camera is turned on.

  1. hO5V1oB22nF1jLYb

    • Open the memory card chamber on the bottom panel of the camera.

  2. Odxqo6QPphFC1Bjy

    • Push to eject the old memory card out of place.

  3. yEvYBpChwqbKdFTF

    • Insert the new memory card in. Make sure that it is inserted in the appropriate direction.

  4. okdTSmXxD32D1uHD

    • Close the memory chamber and start the camera again.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Hieu Ngo

Member since: 22/03/17

431 Reputation

0 comments