Introduction

If the wind and rewind dials on the top of the camera are hard to turn or visibly damaged, they may need to be adjusted or replaced. This guide will walk you through the steps of removing the dials. Please make sure you have all the necessary tools before you start.

  1. y61Ym6BjwU3IVNX4
    y61Ym6BjwU3IVNX4
    Mwvwwj3jgv2QuukI
    g2KkXP14ug3A4m1t
    • While holding the wind dial with one hand, remove the 2.8mm flathead screw that holds it in place with the 2.5mm flathead screwdriver.

  2. EfaHju3g6NNPcCnP
    EfaHju3g6NNPcCnP
    RXJnrtuAJW1ysnk6
    • While holding the rewind dial with one hand, remove the 2.8mm flathead screw that holds it in place with the 2.5mm flathead screwdriver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Borkland

Member since: 07/09/16

312 Reputation

0 comments