Introduction

Use this guide to replace the back cover.

  1. 3rHHIOIndL6VKLYp
    3rHHIOIndL6VKLYp
    dhXFgcKIDEyOubOC
    • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

  2. f3DhWK1pGpJjcwMK
    • Turn camera so the bottom is facing up and the front is facing away.

    • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

    • Back cover is now unscrewed an can be removed.

  3. s1QWLWjDXnaWCMLL
    • Have the back of the camera facing up.

    • Unscrew the 6.2mm Phillips screw next to the viewfinder.

    • The back cover is now unscrewed. Lift up and pull the cover off evenly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michelle

Member since: 05/04/11

107 Reputation

0 comments