Introduction
This guide provides step-by-step instructions for removing and replacing the camera lens. There are two tools required and no safety precautions needed.
Tools
-
-
Turn off camera by firmly pressing the power button that is located on the top of the camera.
-
-
-
Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.
-
-
-
Remove the LCD display by unplugging the connector
-
Take apart the LCD display from the back case
-
-
-
Use a J00 screwdriver to remove two screws located on the far right, near to the main button.
-
-
-
Use a J00 screwdriver to remove 6 screws located at the center of the back panel.
-
Gently pull out the lens using you finger tips or pincers.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.