Introduction
In this guide, we will show you how to replace an overcharged, low-performance hard-rubber coupling in a Kitchen Aid Mixer 5KSB52 UltraPower.
-
-
Disconnect the blender from the power supply. Prepare tools and spare parts. Tools required: original spanner, small water pump tongs. Spare part: hard rubber coupling
-
-
-
Loosen the defective coupling with water pump tongs and original open-ended spanner. Hold the axis with an open-ended spanner and unscrew the coupling. Remove coupling.
-
-
-
Insert the new coupling and screw it on slightly. Screw the new coupling by hand with a spanner.
-
Conclusion
Repeat the steps in reverse order to reassemble your device.
Eine gute Anleitung- aber das Wichtigste fehlt - es soll sich um ein Linksgewinde handeln. Also nach rechts aufschrauben.
Gruß Klaus Dieter
Klaus Dieter -