Kenwood KDC-BT362U LCD Screen Replacement

Written By: Steven Chov
  • Comments: 0
Kenwood KDC-BT362U LCD Screen Replacement

Difficulty

Moderate

Steps

10

Time Required

5 - 10 minutes

Introduction

If your Kenwood KDC-BT362U LCD screen has been damaged and needs to be replaced, follow this guide.

  1. AyWsMLwoiTWuqFfD

    • Locate the face-plate eject button.

  2. FyrHDQbARNQx2ZXL
    FyrHDQbARNQx2ZXL
    tDPW4nqxTDEIbTuX

    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. j3lJAGYwAHCOvDNr
    j3lJAGYwAHCOvDNr
    nsME2qxXF1V3PKHx

    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. leEN1Z3aovxNTRGk
    leEN1Z3aovxNTRGk
    3DaVdVXCgW5rQyQt

    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. UMbncD1ixfr2qeWi

    • Remove the front panel.

  6. iEP4sAFAcUnxrSj3

    • Use the Phillips #0 Screwdriver to remove the four screws.

  7. ncTedgvTiqSQ3OJ1
    ncTedgvTiqSQ3OJ1
    vFEXjTqWl2IGlJOr

    • Use the plastic opening tool to pry it open.

  8. EiZ6erLeLsARNnIS
    EiZ6erLeLsARNnIS
    VeV26OsPXyLIYkhR

    • Lift and remove the motherboard to reveal the inside of the front panel.

  9. URVNQ6Bg1iC1jhcp
    URVNQ6Bg1iC1jhcp
    UgKn2SKaSpDFxVwb

    • Use the metal spudger to straighten out the six pegs to allow the removal of the LCD Screen.

  10. vkRXLgZypmUnsU6k
    vkRXLgZypmUnsU6k
    RfbvEY3WoQSwpro2

    • Lift the LCD Screen to remove and replace it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Steven Chov

Member since: 04/10/16

349 Reputation

0 comments