Kenwood KDC-BT362U Button Replacement

Written By: Steven Chov
  • Comments: 0
Kenwood KDC-BT362U Button Replacement

Difficulty

Moderate

Steps

10

Time Required

5 - 10 minutes

Introduction

  1. AyWsMLwoiTWuqFfD

    • Locate the face-plate eject button.

  2. FyrHDQbARNQx2ZXL
    FyrHDQbARNQx2ZXL
    tDPW4nqxTDEIbTuX

    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. j3lJAGYwAHCOvDNr
    j3lJAGYwAHCOvDNr
    nsME2qxXF1V3PKHx

    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. leEN1Z3aovxNTRGk
    leEN1Z3aovxNTRGk
    3DaVdVXCgW5rQyQt

    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. UMbncD1ixfr2qeWi

    • Remove the front panel.

  6. bXPE5tODGHNVN1fL

    • Use the Phillips #0 Screwdriver to remove the four screws.

  7. oJk6Ueoc3y3TXyDM
    oJk6Ueoc3y3TXyDM
    jTgqE1YwFfqHqLsl

    • Use the plastic opening tool to pry it open.

  8. pvWIAT5i2Qsmk2ae
    pvWIAT5i2Qsmk2ae
    QnRDCJsCmbEESiVi

    • Lift and remove the motherboard to reveal the inside of the front panel.

  9. EIFoQtVfMoITtTIc
    EIFoQtVfMoITtTIc
    ksDIi3VbEbpBLURo

    • Use the plastic opening tool to lift up and remove the cover.

  10. BDPOSNS5RkQ66L3I

    • The buttons are now able to be removed and replaced if damaged or missing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Steven Chov

Member since: 04/10/16

349 Reputation

0 comments