Introduction
A Kangen water machine is a handy gadget that provides you with clean, healthful alkaline water. It is critical to replace the water filter on a regular basis in order to maintain water purity and machine efficiency.
To maintain the highest water quality, it is recommended that filters be replaced every 6-12 months. This guide will help you through the process of replacing the water filter in a Kangen Leveluk 8 water machine.
Before beginning make sure to turn off the machine and water supply to avoid water leaks. For an extra precaution unplug the machine.
Tools
Parts
-
-
Turn on the machine and select "Setting" at the bottom of the menu.
-
Select "Filter Check" located towards the bottom of the Settings list; it is the second-to-last option.
-
If the filter check menu indicates that the filter needs to be replaced, proceed with following steps.
-
-
-
Shut off the water supply to the machine.
-
Ensure your sink is not running or the filter compartment will leak water during the process.
-
-
-
Push the white arrow up on the left side of the machine to remove the filter compartment cover.
-
-
-
Remove the existing filter from the filter compartment.
-
Place a cloth underneath the filter compartment to catch any water that may leak during removal.
-
Align the new filter with the threads inside the filter compartment. Adjust as necessary.
-
-
-
Insert the locking mechanism into the machine by pushing it into the slot on the right side of the filter compartment.
-
Push the lock in a counter-clockwise direction until reaches the end of the slot.
-
-
-
Close the filter compartment.
-
Test run the machine with water to ensure it runs properly with the new filter and to see if there are any more errors.
-
Inspect the filter compartment for any leaks.
-
The old filter can be disposed of in a garbage bin.
-