KYVOL CYBOVAC E20 Side Brush Replacement

Written By: Christianna Zimmerly
  • Comments: 2
KYVOL CYBOVAC E20 Side Brush Replacement

Difficulty

Very easy

Steps

2

Time Required

1 minute

Introduction

If your Kyvol Cybovac E20 is not cleaning properly, there may be an issue with the side brushes. Side brushes are meant to pick up debris that would be missed otherwise. It is also helpful for cleaning baseboards or wall molding. Check the brushes for any debris and clean them thoroughly. If the brushes still do not work, use this guide to replace them.

  1. I5JwMZsYCARkGE1Z
    I5JwMZsYCARkGE1Z
    thPlRYaPC5brEVat

    • Start by placing the vacuum on a flat surface.

    • Flip the vacuum over with the bumper facing you.

  2. IPrhY55P4VbDBAfe
    IPrhY55P4VbDBAfe
    ZSKhLstVtVuJbDeo

    • Lift up the side brushes to remove them from the vacuum.

    • After installing the new brushes, spin them to ensure they are in place.

    I did that and still doesn’t work

    Lana Snow -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Christianna Zimmerly

Member since: 09/02/23

85 Reputation

One comment

U cleaned the side brush and it still won’t work

Lana Snow -