KYVOL CYBOVAC E20 HEPA Filter Replacement

Written By: Brooke Hernandez
  • Comments: 0
KYVOL CYBOVAC E20 HEPA Filter Replacement

Difficulty

Very easy

Steps

5

Time Required

5 minutes

Introduction

If your Kyvol Cybovac E20 is not cleaning well, the filter may be the issue. The HEPA filter inside the vacuum needs to be cleaned every 2 weeks, but needs to be replaced every 2 months. Follow this guide to replace the HEPA filter.

  1. mZvbGmXrxpZWBUVj
    mZvbGmXrxpZWBUVj
    IKTHedvwo5EWeNnD

    • Empty the dust bin before beginning.

    • Start by placing the vacuum on a flat surface.

    • Flip the vacuum over with the dust bin facing you.

  2. eVuh2e2vc6Vsm2qk
    eVuh2e2vc6Vsm2qk
    XUuXQYidmQVAsarR

    • Remove the dust bin.

    • Flip the dust bin over so you can see the filter compartment.

  3. MUN5sP3ibYKJHYem
    MUN5sP3ibYKJHYem
    iZtSmjKsoApfSNKX

    • Open the hatch to the filter compartment.

  4. vxwVwFlvNUOZpevh

    • Take out the plastic case with the filter inside.

  5. nGyjI1HXetNWkGpG
    nGyjI1HXetNWkGpG
    BTZo6mUFYCuKF5WK

    • Pry open the plastic casing.

    • Pull up the white tab to remove the current filter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brooke Hernandez

Member since: 09/02/23

327 Reputation

0 comments