KDDI Kyocera A5521K Front LCD Screen Replacement

Written By: Dominic Grisafe
  • Comments: 0
KDDI Kyocera A5521K Front LCD Screen Replacement

Difficulty

Moderate

Steps

8

Time Required

20 minutes

Introduction

These instructions will demonstrate how to remove the front LCD screen from the KDDI Kyocera A5521K.

  1. pw6lmof5mTXELmae
    pw6lmof5mTXELmae
    BuQok1JUYd25O4mw
    rQXRGneBnkihQheC

    • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

  2. wWkZLR5SaUQjTIyE

    • Remove the screws using a Y0 screwdriver.

  3. MxFJ4qZOoToxekpM
    MxFJ4qZOoToxekpM
    bdx4VMNpGmMiAhUB
    euCoD4sTMBNNXqRP

    • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

  4. 3F45Gy5UaYAtXEPw

    • Use the Y0 screwdriver to remove the screws.

  5. tcpFkWA6SBYVMYd5
    tcpFkWA6SBYVMYd5
    omIKLs3kMmektrKU

    • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

  6. epraiFHOevmT44uE
    epraiFHOevmT44uE
    FOSyXCvXVwcNEgbe
    XQFmiuY2T2KnvvAF

    • Separate the faceplate from the phone.

  7. SZLH5ZwrYUYRLrOa
    SZLH5ZwrYUYRLrOa
    BQcPLPbQn21hoaBA
    x2ltFhHneQC6h6v2

    • Rotate the phone 180 degrees.

    • Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip).

    • Pull the flexible circuit to towards you to separate the front LCD screen from the phone.

  8. cLFCZVJAOkEbaQtj
    cLFCZVJAOkEbaQtj
    u1ak2cZTkbavpSFs
    DNH2DFwXGD5AyAIF

    • Firmly pull the flexible circuit from the connector.

    • Be careful not to damage the flexible circuit.

    • The front LCD screen should now be separate from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dominic Grisafe

Member since: 15/04/10

157 Reputation

0 comments