ILVE Microwave Replacement Bulb Replacement

Written By: Martin Hampton
  • Comments: 0
ILVE Microwave Replacement Bulb Replacement

Difficulty

Moderate

Steps

5

Time Required

20 minutes

Introduction

  1. nlrooYHd45fyC5F4

    • Remove the brown plug.

    • The screw attaching the microwave is below

  2. JkCRaPLZHqrOLap3
    JkCRaPLZHqrOLap3
    bSWJtg1SwjOp64UF

    • Remove the cross point screws from the outer case back

    • One screw has a tamper proof head so cut a slot it in and unscrew with a flat head screw driver.

    • Take caution to ensure that no metal shards fall inside the microwave. You may want to tape over the holes or wipe the area off with a damp cloth or paper towel once finished.

  3. hOjqbP1pmbBpAwRB

    • The socket is on top right side of the microwave

    • Remove the plugs

    • Bend up the metal clips, and pull out the socket

  4. sBkmFdnLsWfeMIEf
    sBkmFdnLsWfeMIEf
    beQQV2NLZurMXNTp

    • Remove the white glue (or sealer) that's around the bulb screw using a small screw driver.

    • The glue goes all the way down the thread so remove as much as you can see.

    • Use leather gloves to unscrew incase the bulb breaks. It need quite a lot of force so make really sure you've got every bit a glue out.

  5. LGr3YniTXnuynH1I

    • When you re assemble the outer case make sure the tabs on the front go either side of the front.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Martin Hampton

Member since: 13/02/16

1308 Reputation

0 comments