Introduction

Follow this guide to learn how to use an anti-static wrist strap.

Anti-static wrist straps help minimize electrostatic discharge (ESD) when repairing electronic devices. Although not technically required, they pair with anti-static mats to equalize the charge between your hand and the device.

For more information on ESD, click here.

  1. YVhd5Iw3ypkBAaDa
    YVhd5Iw3ypkBAaDa
    Qx2OFQpPA4hgkXEM
    • Before you begin, remove any jewelry from your wrist and fingers.

  2. TbbFFBkhwVLE3PUh
    TbbFFBkhwVLE3PUh
    ZjIkKkOoMfgYTQX6
    • The anti-static strap should be adjusted to fit snugly on your wrist.

    • Pull up on the looped end of the strap to disengage the plastic lock.

  3. lTlNHmOkOaCgbFa4
    lTlNHmOkOaCgbFa4
    HMFPPXnvyI4VTAFi
    • To tighten the strap, pull the looped end away from the plastic slide.

  4. IXP4SCWLjbaZXYEF
    IXP4SCWLjbaZXYEF
    lZwOfOvKeS62PfXW
    • To loosen the strap, pull the main part of the band away from the plastic slide.

    • Re-engage the plastic lock before continuing.

  5. KZYEQpy4b6S3IkkA
    KZYEQpy4b6S3IkkA
    TKeDYOvLxxZhU4BU
    • Slide the strap over your hand and secure it to your wrist.

    • If the strap is still too loose or tight, you can adjust it while it's on your wrist.

  6. YYyYlUChWGYbVBab
    YYyYlUChWGYbVBab
    DhVNxJx2POtpxIwF
    • Attach the metal clip to one of the grounding nodes on an Anti-Static Mat or a grounded metal surface.

    What qualifies as a grounded metal surface?

    Henning Sprang -

  7. BTMMNxDqKgcYQxqy
    • You're now ready to repair.

    • During your repair, be mindful of the strap's cable, as stretching it too far can cause the clip to unsnap.

Conclusion

For other general electronics skills guides, click here.

Alex Diaz-Kokaisl

Member since: 16/01/22

117875 Reputation

4 comments

J'ai un doute…
Retirer tout bijou/montre/whatever, mais uniquement sur la main où l'on met le bracelet (ce qui me paraît logique) ou bien des deux mains ?

Yacou -

peut ton se connecter direct ex: sur une prise éléctrique avec l'embout terre de la prise

Lucka Lellig -

Bonjour @luckalellig non, ceci est fortement déconseillé !! Le courant des prises électriques est trop fort et risquerait de vous électrocuter.

Claire Miesch -

non la terre pas ce branche au pole positif et négatif

Lucka Lellig -