How to True a Bent Bicycle Rim Using Common Tools

Written By: Charles Tweedy
  • Comments: 0
How to True a Bent Bicycle Rim Using Common Tools

Difficulty

Easy

Steps

7

Time Required

10 - 20 minutes

Introduction

Bike rim maintenance is an integral part of ensuring a bicycle works properly. Neglecting a bent rim can further compromise the bike's structural integrity, as every turn wears down the brake pads due to scraping.

This guide will show you how to straighten or true your bent bicycle rim using common tools. Truing the bike rim only requires a pair of pliers, and a desire to get one's mode of transportation working as good as new again!

  1. QmZUNklogLdssGRJ

    • Bring your bike somewhere with ample space so you have room to work.

  2. bLNYwrb5Pqa3ATmn
    bLNYwrb5Pqa3ATmn
    iJIxLKNgq4qHxEYP
    1JuAwUt2lmRXNKJf

    • Flip the bike on its seat so the wheel can spin freely.

    • Use the spokes to spin the affected wheel.

    • Continue spinning the wheel until it is clear where the bend is occurring.

  3. OFfUCNTfMfkE2uHU
    OFfUCNTfMfkE2uHU
    OOtkELOuhbBrqeQ1

    • Locate the bend by spinning the wheel to see where it doesn't align with the brake.

  4. iKefgXtCBCM1nPya
    iKefgXtCBCM1nPya
    1ysLIyqouUey2qHh
    apF1xTdQVPAvFZQZ

    • Locate the two nearest spoke nipples opposite to the bend direction and tighten them a half turn using an adjustable wrench or reaming pliers.

  5. 1IhmKU1TkkHjNYjg
    1IhmKU1TkkHjNYjg
    KsHrUWa2Q1QxlNhU

    • Pluck the spoke and listen to the pitch to check its tightness.

    • If the pitch is higher, you are tightening it, and if the pitch is lower, you are loosening it.

  6. 2Wq2F3YqbDPQlvRP
    2Wq2F3YqbDPQlvRP
    2K3Rf23gAGXEjnVh

    • Loosen the spoke nipples opposite to the ones being tightened to reduce stress in the wrong direction.

  7. jxMZfUr56AQxrKH3

    • Assess the dent in the bike rim and assure it's mostly straightened out relative to the break pad.

    • Repeat the tightening/loosening process accordingly if necessary.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Charles Tweedy

Member since: 19/04/23

145 Reputation

0 comments