How to Replace/Maintain a Honda HRR216 Lawn Mower Air Filter

Written By: Pearce McKee
  • Comments: 0
How to Replace/Maintain a Honda HRR216 Lawn Mower Air Filter

Difficulty

Easy

Steps

6

Time Required

5 - 10 minutes

Introduction

This guide will demonstrate how to increase the life of the air filter for the Honda HRR216 lawnmower.

Maintaining the filter is something that I do after every summer due to how often I use the lawnmower.

Steps 1,2,5, and 6 in this guide can also be used for removing or replacing the filter, as it will eventually wear down.

  1. QyNDqvZ1KhrtTl1J
    QyNDqvZ1KhrtTl1J
    SRtveTZXDxYDHUCV

    • Make sure that the motor is off and has had time to cool after being used.

    • Push in the clips on the top of the cover, and remove the cover.

  2. fl2kTItZbY4x1XMd

    • Make a note of the position of the filter, and remove the cover.

  3. YSQreksUp4lOHoSI

    • Lightly bend the filter so that you can see all surfaces of the filter.

  4. TwVXfi1frYNEo6ZI

    • Use compressed air to blow out dirt or dust particles from the air filter.

    • You can bend it in several places to make sure you clean between each of the fins.

  5. WDZDj1ndsDDVry36

    • Seat the filter in the same position you made a note of in Step 2.

    • If the filter is still bent from cleaning it, lightly bend it in the opposite direction so that it can lay flat in your hand.

    • Place the cover onto the air filter. This shouldn't require any force, so the filter may need to be readjusted if it does require force.

  6. ACrgDYBGCUv5NJTE
    ACrgDYBGCUv5NJTE
    KkhRkKhlwKH3Jriv

    • Push the clips of the cover in until they click.

    • Check to make sure that the cover is secure, and there are no gaps for dirt or dust to get in.

Author

Pearce McKee

Member since: 31/03/20

133 Reputation

0 comments