Introduction

If your vacuum cleaner no longer cleans as good as it used to, this might be an indication that the filter has been clogged and it is too dirty to keep being effective. This guide covers how to take out the filter in the Nequare Cordless Vacuum S182 and replace it. The steps are accompanied by photos to guide you through the process.

  1. I2EpvceUDTckKD4l
    I2EpvceUDTckKD4l
    JVECNLrCjFonRCGO
    • Locate the black button to release the white motor unit from the rest of the vacuum cleaner.

  2. SQ1uTwRZwdtOfOSk
    SQ1uTwRZwdtOfOSk
    X1HPmJfnAYJvBGUT
    • Hold down the black button to remove the white motor unit above and gently pull the motor unit upwards.

  3. MapvOEKDRFrdNNsd
    MapvOEKDRFrdNNsd
    jAeqgcOGyBRu3gDS
    • Press the release button at the side of the dust canister to dispose of the debris.

    • Be sure to hold the the canister over a garbage can to avoid a spill.

  4. ylNljWjnIFPVwtqC
    ylNljWjnIFPVwtqC
    jYFfMtWRftvGl25X
    1twV1XDhKKnBEAms
    • After emptying the debris, hold down the black button, then twist and pull the canister out.

  5. Yeavuc3fdL1jSorn
    Yeavuc3fdL1jSorn
    uITuTu3MvQYkAgpa
    • Take the filter out and dispose of it.

  6. Y1RxPy3GmceESJpP
    Y1RxPy3GmceESJpP
    FKbOkdSMc6XO5cQu
    • Remove the black part by gently pushing from inside of the canister.

  7. 6qXkBaXqIENBpRA4
    6qXkBaXqIENBpRA4
    RQxgiAb2G1DwGQED
    • Clean both the canister and the black part either by rinsing it out or using a wash cloth.

  8. bXGagvSx6KyWTAdJ
    bXGagvSx6KyWTAdJ
    kO6VgeMCDYOFTtqI
    LFaMXcJR1tdgdJWi
    • Put the black part back into the canister and put in the new filter.

    F------- Chinese discontinued the filters. The piece of s---- is obsolete 2 years later and landfill fodder.

    Rich -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Oghenefejiro Egede

Member since: 27/01/21

181 Reputation

0 comments