Introduction
Use this guide to replace a broken lever in your T-fal Avante T24-B toaster.
Toasters are a staple in many households, providing a quick and easy way to make toast for breakfast, a sandwich for lunch, or a snack any time of the day. However, like any other appliance, toasters can break down over time and one of the most common problems is a broken toaster lever. A broken lever can make operating the toaster difficult and even be a safety hazard. Fortunately, replacing a broken toaster lever is a relatively simple process that can be done with just a few basic tools and some guidance. In this guide, we will walk you through the steps to replace a broken toaster lever.
-
-
Flip the toaster so that you can see its underside.
-
Remove the seven 20 mm Torx T3 screws from the bottom of the toaster.
-
-
-
Turn the toaster so that you can access the back of the toaster
-
Remove the 3 15 mm Torx T3 screws from the back of the toaster.
-
-
-
Unplug the casing so that it does not get in your way.
-
Unplug both wires connecting the casing to the internals of the toaster.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Thank you so much!
S J -
where do you get the replacement lever ?