How to Replace Keys on a Keyboard

Written By: Cooper
  • Comments: 3
How to Replace Keys on a Keyboard

Difficulty

Easy

Steps

5

Time Required

10 - 20 minutes

Introduction

Do you have a keyboard with keys that do not work? Use this guide to replace your keys and return your keyboard to proper working condition.

  1. uEPZiraBvJEi4EMZ
    uEPZiraBvJEi4EMZ
    SDAVeR4O3RkB4COb

    • Loosen the key by prying all four corners gently with your spudger.

    • Make sure your keyboard is unplugged before performing any of these steps.

  2. wxbBBdMKhYbMl63J
    wxbBBdMKhYbMl63J
    WgMZPb4ndQLIEgQR

    • Wedge the tip of the spudger under the bottom of the key and carefully lift up until the key pops loose.

    • If the key will not come out, or seems like too much force is needed, try step one again.

  3. HSCoS1vgjIT4JNER

    • Use tweezers to remove any contaminants that were preventing the key from being pressed down from the now open hole on your keyboard.

    • Do not to grab the actual button, as breaking that could damage your keyboard permanently.

  4. 3RX4L2RF6YIx6ixO

    • Clean your keys with compressed air by blowing around the removed key.

  5. vJ2msFj3dILcPkPw
    vJ2msFj3dILcPkPw
    fvs24OY5ZJbBZ5tJ

    • Push in the clean keys until you hear a popping sound.

    • The keys should click in easily, so if you are having trouble try realigning the key with its hole.

    • If you removed multiple keys, make sure they are in their proper spot and orientation.

Conclusion

Congratulations! You now have a keyboard with fully functional keys!

Author

Cooper

Member since: 24/02/15

457 Reputation

2 comments

This is How to CLEAN keys, not replace them. Duh.

Mike Miller -

I came looking for how to replace the problematic ones like + on numpad :<

Eskalina Cvrnkalikova -