Introduction
Do you have a pair of shoes or just one shoe with a hole on the shoe sole? With this guide, you will be able to repair the hole and reuse the shoe rather than buying a new pair.
Tools
Parts
-
-
Clean the outsole with a wet paper towel.
-
Clean and dry the outsole with a paper towel before starting.
-
-
-
Pull the insole out of the shoe.
-
Apply duct tape inside the shoe (on the other side of the hole).
-
Make sure the duct tape covers up the entire hole, so there will be no shoe goo going through the sole into the shoe.
-
-
-
Use the 120 grit sand paper to rub the surface of the outsole until the shoe goo portion is smooth.
-
Now you can walk again!
9 comments
Excellent - thank you
I used shoe goo on part of the sole that touch the concrete and over about a weeks time it eventually just fell out.
kimdelee -
I wonder if there is any tip for a sole that has a hole all the way through. I tried something similar like this guid but it was quickly worn out. Maybe if I reinforce with duct tape and build the hole up from inside out, then make it a 2 step progress and do the outside first. Let dry for 2 days and then approach the same from the inside. Hmm such a shame certain brands have weak soles