Introduction
This guide shows how to drain the carburetor fuel bowl of fuel before you work on the carburetor.
You will need a small container to catch the fuel.
-
-
Grab the plastic housing at the end of the spark plug wire.
-
Pull firmly to disconnect the wire from the spark plug.
-
-
-
The carburetor drain screw is located at the bottom of the carburetor.
-
Use a flathead screwdriver to loosen the fuel drain screw until fuel begins to drain out of the carburetor.
-
Once you drain the fuel bowl, re-tighten the fuel drain screw.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
