How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel

Written By: Colin
  • Comments: 1
How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel

Difficulty

Moderate

Steps

5

Time Required

15 minutes

Introduction

Do you ever find your scroll wheel getting stuck often? You may need to clean that dusty and grimy wheel to help you gain that edge in games, make you more efficient in your work documents, and much more!

  1. RaDnLjmvxU6tFgoW

    • Use a Phillips #0 screwdriver to remove the stickers that are hiding the screws.

    • The sticker may or may not stick back on the mouse after you complete the cleaning. You may want to use some clear tape to replace the stickers.

  2. bJqf2IILqNFNPUqm

    • Remove four screws using a Phillips #0 screwdriver.

  3. cgCNxGZyUjjQPDgV
    cgCNxGZyUjjQPDgV
    qUFkkfPHRZZwtmGO

    • Use a spudger to pry along the center seam of the mouse.

    • Open the outer casing of the mouse.

  4. Tbgh1MXEX5lH5wge

    • Remove the wires from the white crimp headers in order to separate the upper and lower housing units of the mouse.

    • Pull the wires as gently as possible to ensure that the wires will not break.

  5. lKURIwKD4AGBW6H4
    lKURIwKD4AGBW6H4
    YftRqTwTpFJOVbPx

    • Take a cotton swab and lightly remove any dirt or debris around the pin connections of the scroll wheel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Colin

Member since: 10/02/14

406 Reputation

One comment

You don’t tell how to put the stickers back because they won’t stick again…

p.pisu -