How to Assemble the iMac Cardboard Service Wedge

Written By: Craig Lloyd
  • Comments: 2
How to Assemble the iMac Cardboard Service Wedge

Difficulty

Very easy

Steps

5

Time Required

1 - 2 minutes

Introduction

Follow this guide to assemble the iMac Cardboard Service Wedge, which ships unfolded and flat. Once assembled, this product is not designed to be unfolded.

  1. 4VQDrEn6J1SQ3KUi
    4VQDrEn6J1SQ3KUi
    AdL55XcYijLJjfm3
    xaUQX34RUGcZm3L3

    • With the blank side facing you, fold the two tabs inward at a 90-degree angle.

  2. nwuLmDLFSrPCWmBG
    nwuLmDLFSrPCWmBG
    k3AHbYoGcWccKZ1Y

    • Fold the two outer side flaps inward at a 90-degree angle.

  3. LilUxTpXUL4xNplO
    LilUxTpXUL4xNplO
    wajSJNC6pIKFZsWp
    pjXZKAXm4snrIWCp

    • Fold the two halves together, using the crease in the center as the folding point.

    • Overlap the two outer side flaps, making sure the flap with the two small tabs is on top.

  4. KFst5eDtNQxvAWJd
    KFst5eDtNQxvAWJd
    VkF6ZZPJAFOXdSGB
    2A5gEPahusUVTA3K

    • Insert the two tabs into the slots along the fold.

    • Make sure the flared edges on either side of the tabs are inserted completely into the slots so that they lock in place and don't slide out.

  5. ka413IYUWhLrcOgX
    ka413IYUWhLrcOgX
    MHhMWG2wrXhsGZD3

    • Your iMac Cardboard Service Wedge is ready to go!

    • Insert the Service Wedge under the iMac's display to hold it in place while you perform repairs on your iMac.

    How and where does one get hold of this product?

    What are its dimensions? Is there a template?

    Thank you

    Michael Sheriff -

Author

Craig Lloyd

Member since: 10/02/16

35240 Reputation

One comment

Nice explanation, however, the cardboard stand is available in the US and not here and so it the dual HD cable for the iMac Intel 27” (mid 2011).

No good posting a great helps tory if the parts are not sold in Australia.

Hank Doll -