How To Remove Rust From Old Tools

Written By: Geoff Wacker
  • Comments: 3
How To Remove Rust From Old Tools

Difficulty

Easy

Steps

5

Time Required

15 minutes

Introduction

Do you have some rusty old tools laying around the house? Use this guide to remove that pesky rust and return your tools to good working condition.

  1. w5215sx3BMuAFjwQ
    w5215sx3BMuAFjwQ
    OUASpEyZH2MM3jOY

    • Removing rust generally isn't dangerous, but it's pretty messy.

    • Prepare your workspace by laying out an old towel or shop rag that you won't mind getting dirty.

    • Consider also wearing protective gloves.

    • Place your tool on the towels.

  2. 5OWvPoBqiArGYTYQ
    5OWvPoBqiArGYTYQ
    NTaOAQqFFopT1ELN

    • Spray the rusty areas of the tool with a generous amount of WD-40.

  3. qJMajIAgqJYinTR4
    qJMajIAgqJYinTR4
    ytbL6ymgfFDEeUNN
    ypoWK4m1mFaLuO4T

    • Use a scouring pad to thoroughly scrub the tool.

    • It shouldn't take a lot of force—the WD-40 and scouring pad will do most of the work.

  4. OwMOKYfZluoCANsQ
    OwMOKYfZluoCANsQ
    tsN1HQGabkUkgQHT
    him3BFWfHZxAMsWo

    • Use a paper towel to wipe away the excess grime and WD-40.

  5. JAVIq2eZIkEEbdSX

    • Continue scouring the tool, adding more WD-40 as needed, until the surface is free of rust.

    • When you finish, your tool may not look brand new—but the surface should now be rust-free and ready for years of continued use.

    you need to use a zoom in picture in step 4 for step 5!

    stephen harrison -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Geoff Wacker

Member since: 30/09/13

89849 Reputation

2 comments

Apple cider vinegar removes rust well. Try it.

Michael Jucker -

Thank you I have tried vinagar ,rust buster and other sprays and only the WD 40 worked best

Ronald Tyler -