How To Install Universal Fit LED Daytime Running Lights

Written By: Eric Wu
  • Comments: 11
How To Install Universal Fit LED Daytime Running Lights

Difficulty

Moderate

Steps

7

Time Required

1 hour

Introduction

LED daytime running lights are a great add-on to any vehicle to increase light output for style and safety. Some LED daytime lamps are vehicle specific, but this set of Philips Style LED DRL is universal fit for more cars and SUVs.

  1. TPIFTt26aNifjj2Y

    • Insert the wire into the bracket.

  2. Db3ZikPFBYrnCbbr

    • Mount the bracket. Since this is universal fit, you can mount it anywhere you'd like.

  3. 2jKqFIhTolFlYt6r

    • After mounting the bracket, you can lock the LED daytime running light on the bracket.

  4. YEtHwEoCtVXVOPLq
    YEtHwEoCtVXVOPLq
    XcpoqwmIVrn5Lapn

    • Connect the wires and route the wires up and near the fuse box.

    • Use zip ties to tie the wire along the bumper.

  5. bKKqqeWFu3TKBBrw
    bKKqqeWFu3TKBBrw
    JeDfFswnOHCEapWJ

    • Find the ACC in your fuse box and tap the red wire there.

    • You can find the ACC location using an electronic meter by clamping the black wire to the battery negative or ground.

    • When you find ACC, tap the red wires to the blade of the fuse and insert it back.

  6. vAfHlt5WKEyLpmgk

    • Tap the black wire to battery negative.

  7. 2ytQSCLKJpuycOQO
    2ytQSCLKJpuycOQO
    RCkmNnbhoowEYwUF
    PC2pCgDLrWgrfPl3

    • Test to make sure everything works and enjoy your new universal fit Philips Style LED Daytime Running Lights.

Conclusion

As you can see, installation isn't complicated and if you follow the directions accordingly, you'll be on your way to new LED daytime running lights in no time.

Author

Eric Wu

Member since: 22/01/15

3357 Reputation

11 comments

Useful information shared. Thanks for giving us nice info. Fantastic walk through. I appreciate this post and here is my link

http://optixautolabs.com/

Calvin Macaraeg -

Useful info. Thanks

grant.edson -

great information and pictures, just one thing, what size of fuse should I use for connection in fuse box.

steve finlayson -

UK road/MOT law states you must 60% dim or better still, make DRL’s turn off when headlights are turned on … stop advertising fake information Phillips and start stating some facts for a change

i cry when i wii -

When did Philips ever make a comment on brightness? Its your responsibility to ensure you meet MOT regulations, not theirs.

AdamA -

Wot about the indicator wire

Andrew Mcdonagh -

Indicator has nothing to do with it as these aren’t switchback

AdamA -

Hello. Can I wire 2 drl to this same fuse?

Bálint Rónai -

The wire connection directly to the ACC fuse is both unsafe and unprofessional. Using the method you describe, if the LED DRL, or a bare wire causes the fuse to blow, all ACCessories will be disabled. Also, your description doesn't ensure you are connected to the back side of the fuse, anyway. The proper connection would be a quick-tap splice to the back-side wire of the ACC fuse with a separate in-line fuse for the DRL. That way, if the DRL overloads the fuse, only the in-line fuse will be blown and the rest of the ACCessories will still have power.

Herman Spoot -

Thanks for sharing this guide with us. I like this because each details are mentioned; with images. by some times our vehicle became very old; and we need to update it instead of replace the best option is cash for cars I think.

cash for cars: https://www.a1autorecycling.com.au/

#top_cash_for_cars

#cash_for_cars

Elex Rathore -