Hover-1 Maverick Battery Replacement

Written By: Piper Feldman
  • Comments: 2
Hover-1 Maverick Battery Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

This guide for the Hover-1 Maverick guides users in replacing the battery in their device. The battery is crucial in powering the hoverboard. Symptoms of having a faulty battery include the device not being able to move, hold a charge, or power on.

  1. DjyZ23RwMwUwbC55
    DjyZ23RwMwUwbC55
    QSZWduI1UuhwS6Nc

    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Remove the shell.

  2. MXmiCxsWrIYDMKNO
    MXmiCxsWrIYDMKNO
    BCDCwDhYvY2IHULk
    ZBNVpxXwUYhYTiik

    • Remove the four 8mm Phillips #1 screws holding down the black plastic casing.

    • Lift off the black plastic retaining bracket.

  3. 2S256544TQBswIhC
    2S256544TQBswIhC
    PdUsjSLrLKpDRHMp

    • Pull the battery upward lightly to remove from the device.

    • The battery is secured to the device with adhesive tape.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Piper Feldman

Member since: 23/01/20

409 Reputation

2 comments

What voltage should the battery put out? Mines is 30v, charger is green at the wall but still the board won’t turn on

Barry Rogers -

Where can I find that same battery i cant find one

Toad Blue -