Hott T725-8G Camera Replacement

Written By: Emma Carroll
  • Comments: 0
Hott T725-8G Camera Replacement

Difficulty

Easy

Steps

4

Time Required

15 minutes

Introduction

Follow this guide to replace the camera in the Hott T725-8G.

  1. oNeJMkuDjIdBLCSM

    • Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.

  2. K6koAPmLZodCGCLA

    • Use a pair of Precision Tweezers to squeeze the clip of the ribbon wire to release it.

  3. 5CikFag4BaPeomCR

    • Using a pair of the Precision Tweezers, remove the ribbon wire from the clip.

  4. ietQFMTFVDWfBdGm

    • Gently dislodge the camera using the Metal Spudger. The camera is now ready to be replaced.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Emma Carroll

Member since: 20/10/16

193 Reputation

0 comments