Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement

Written By: Spencer Nefores
  • Comments: 0
Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

Over time your Hoovers filters will get dirty and may eventually need to be replaced. This guide will show you how to do this in a few easy steps!

  1. cW2iejGICigXxgWw
    cW2iejGICigXxgWw
    uJsDpFhiU5cRjSKH

    • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

  2. V1RDd2wlXCChyb3p
    V1RDd2wlXCChyb3p
    B5Ys6BDGScngiiEp
    BOq5PUJGRMvPj6HM

    • Remove the dirt cup from the cleaner.

    • The HEPA filter is located under the dirt cup and under where it says HEPA.

    • Twist the top counterclockwise to unlock the cap.

  3. km5VE4mSboUNF2uq
    km5VE4mSboUNF2uq
    iMY21OD6aZxCwJYo

    • Lift the HEPA filter out.

    • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

    • Do not wash the HEPA Filter.

Author

Spencer Nefores

Member since: 27/09/17

201 Reputation

0 comments