Hoover T-Series WindTunnel Pet UH70102 HEPA Filter Replacement

Written By: Sophia Stockburger
  • Comments: 2
Hoover T-Series WindTunnel Pet UH70102 HEPA Filter Replacement

Difficulty

Easy

Steps

1

Time Required

3 minutes

Introduction

This filter is located at the top of the vacuum. The filter should not be replaced unless visibly worn, or older than 6 months. If neither case is true, simply empty the dust into the trash and put the filter back in place. DO NOT clean with water. This step should begin with the vacuum unplugged.

  1. Q4XOWdPqVDVJ1CjL
    Q4XOWdPqVDVJ1CjL
    aJYWUfcXQieOUX5t

    • Remove the filter by pressing on both indents and pulling away from the vacuum.

    • Clean the filter by gently tapping it on the edge of a garbage can. Replace the filter if it is damaged or is more than 6 months old.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sophia Stockburger

Member since: 23/01/18

566 Reputation

2 comments

How do I replace the Hepa filter? It is older than 6 months but I can not find the replacement part

Julie Yearsley -

Did you ever find it?

Brandon Danaher -