Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement

Written By: Sophia Stockburger
  • Comments: 0
Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

This guide is intended to help you remove your dust filter. This filter can be rinsed if dirty, or replaced if old or dysfunctional. This step should stard with the vacuum unplugged.

  1. CBWjk4KA2hVQuNTO
    CBWjk4KA2hVQuNTO
    wjqZLWVXRp1Obc3A

    • Push silver tab located towards top of vacuum to remove dirt cup from vacuum.

    • Press the tab below the Hoover logo to open the lid of dirt cup.

  2. VVWuaqsQ1Xva4VWR

    • Remove the filter from the top.

    • Rinse under tap water, dry for 24 hours in the sun, and put back in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sophia Stockburger

Member since: 23/01/18

566 Reputation

0 comments