Hoover Presto 2-in-1 Cordless Stick Charger Replacement

Written By: katia zubieta

Comments: 8

Hoover Presto 2-in-1 Cordless Stick Charger Replacement

Difficulty

Moderate

Steps

Time Required

15 minutes

Introduction

The Hoover Presto 2-in-1 Cordless Stick's charger can have a poor battery life which may affect the battery life of your vacuum. This guide will provide steps on how to access the charger for replacement or troubleshooting.

Tools

Step 1

Using a firm grip, gently pull the standing charger away from the floor charger attachment

Step 2

Flip the floor charger over so the screws and sticker are facing you
Using a PH #1 screw driver, remove the two 18mm screws on the right hand side of the floor charger

Step 3

Using a PH #2 screw driver, remove the three 18mm screws on floor charger.

Step 4

Using the metal spudger tool, gently lift up the plastic cover in the upper right hand corner of the floor attachment to uncover a hidden screw
Remove the 18mm screw in the upper right hand corner with a PH #1 screw driver

Step 5

Using the metal spudger, gently pry open the two halves of the floor charger
Once you have made a larger enough gap between the two halves, use your hands and gently pull the rest of the floor charger apart

Step 6

Unscrew the two 18mm screws on either side of the white battery cover with a PH #1 screw driver

Step 7

Using your hands, gently pull apart the two halves of the white battery cover to get to the battery

I don’t know what part is the battery

saguarosam - 16/06/19

This does not look like a battery. I found a battery pack in my handheld part. I did not look in the base since it is not attached when using only the handheld vacuum.

Don Taylor - 12/08/19

I have been unable to find a replacement battery pack however. See above.

Don Taylor - 12/08/19