Introduction
Use this guide to replace the air cleaner housing in a Honda Light Duty Tiller F220K1AT715492.
Parts
-
-
Push down on the two tabs at the top of the air filter cover.
-
With the two tabs depressed, swing the top of the cover down.
-
Remove the cover.
-
-
-
Use an 8 mm socket to remove the following fasteners securing the air cleaner housing:
-
Two silver nuts
-
One black bolt
-
-
-
Use a flathead screwdriver to gently pry the black breather tube off of its connector on the back of the air cleaner housing.
-
-
-
Hold the black carburetor hose in place and rotate the air cleaner housing clockwise until you can slide the hose out of its slot on the air cleaner housing.
-
Remove the air cleaner housing.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
