Introduction

Replacing of processor base. Be sure the processor is unplugged before beginning.

  1. G2OINTjXanvZHGDQ
    G2OINTjXanvZHGDQ
    NlDOZXHcKXHkYCF2
    • Turn the bowl counterclockwise and lift.

  2. PfgnxNDVdlMWBpDV
    PfgnxNDVdlMWBpDV
    N2ewTo5XYJhpIK6I
    • Using a #2 Phillips head screwdriver, remove the two 11 mm screws from the base.

    • Pull suction cups straight out.

  3. NaHRdRmpGnLs5Akv
    NaHRdRmpGnLs5Akv
    gmKNAINZLZ3kBSBd
    UooCLp2cistMFNyB
    • Remove rubber caps using the heavy duty spudger.

    • Remove the four 11 mm screws using the #2 Phillips head screwdriver.

    • Pull base straight out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Travis Williams

Member since: 02/02/17

552 Reputation

0 comments