Introduction

  1. vytBGBheYqyvbwbW
    • Take the back cover off the phone and take the battery out.

  2. XsPnplXMh4wljaZ6
    • Take a SL#2.5 screwdriver and pop the black piece off shown here

  3. VtiVBKhGKgO6f3RM
    • Take a T5 screwdriver and unscrew the two screws seen here

  4. WVMmkfoZJGiBe4yx
    • Unscrew the two screws on the back of the phone with a T5 screwdriver

  5. Ctr514BKArrVtYkE
    Ctr514BKArrVtYkE
    S2ROAM1Tonr1MmB1
    • Take the SL#2.5 screwdriver and pry off the back cover

    • The phone should now look like the second picture

  6. CPRW6ERjnnFuNkLx
    • Take the SL#2.5 screwdriver and lift up the white connector at the top right corner of the phone on the side with the circuit board

  7. Md5waFO6KhbE6QBA
    Md5waFO6KhbE6QBA
    WGFriVHngniYu4NY
    • Next lift up the camera lens from the board.

    • It should now look like the second picture

    • Then lift up the circuit circled in red on the second picture

  8. PYLSxq4Qhy1WJZVV
    PYLSxq4Qhy1WJZVV
    SHbMwwPVYVJ4P2Re
    • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

    • The circuit board should now be detached from the LCD part of the phone

  9. 3P4NSrLPOWaiFaAH
    • Next take the SL#2.5 screwdriver and pry the buttons off the phone and replace with the new ones

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caitlin Bruce

Member since: 04/10/11

23 Reputation

0 comments