HTC Vive XR Elite Inner Plastic Frame Replacement

Written By: Chayton Ritter
  • Comments: 0
HTC Vive XR Elite Inner Plastic Frame Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. lfAGD5Zppv5wylYr
    lfAGD5Zppv5wylYr
    3YJSURX6l4ahc4yk
    V2KZqgEQ61rF2Tsv

    • Use tweezers to peel back the graphite thermal tape covering the inner plastic frame.

    • If the tape tears a little, don't worry! During reassembly, stick it back in its original place as if it were still one piece

  2. 3TbRCHRBJ4ENNGIk
    3TbRCHRBJ4ENNGIk
    V3vPHokOjk4NqJOB

    • Use a T5 Torx screwdriver to remove the nine screws securing the inner plastic frame:

    • Five 11.8 mm-long screws

    • Three 5.6 mm-long screws

    • One 5.6 mm-long screw

    • This screw is covered by a piece of black plastic tape. Use tweezers to remove it before unscrewing.

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

  3. ySlxRdG1nMKOBNiE
    ySlxRdG1nMKOBNiE
    2f1b1okGB5jmAFPt

    • Remove the inner plastic frame, making sure to thread the graphite thermal tape through it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Chayton Ritter

Member since: 21/08/20

17436 Reputation

0 comments