Introduction

Warning: Always be sure you are grounded whenever handling any of the circuit or logic boards.

  1. 2GWPRUyYKrUAZXxW
    • Using your finger, remove the back panel by sliding it up.

  2. CgacyJLNGJjwirnt
    • Remove the battery.

  3. W2yFm5oniltJswHY
    • Remove the four screws in the corners of the phone using the T5 Torx screwdriver.

  4. Txgt3HRJBUpL1oAH
    Txgt3HRJBUpL1oAH
    BXUmGauS6Ndpa1SX
    • Use the plastic opening tool to remove the front panel from the phone.

    • Unplug the front button cable from the inside of the phone.

  5. bDCnQsA2LvPHMUlv
    • Remove the two screws from the back of the front panel using the Phillips #00 screwdriver.

  6. HFSyAXPZUJq1GsxY
    • Remove the small circuit board by gently pushing on the center button on the front of the phone.

  7. fTMKqZLPQMICcgqD
    • Remove the buttons by pushing on them from the front side of the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Brooks

Member since: 13/04/11

101 Reputation

One comment

I need the keypad flex cable. Where to buy. Please guide smahapatra2012@gmail.com

subhas mahapatra -