HTC HD2 Midframe Replacement

Written By: Sam Luedloff
  • Comments: 0
HTC HD2 Midframe Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Use this guide to replace the midframe of your HTC HD2.

  1. xJ5V3IrfIKNKfTUr

    • Carefully pull the rear cover from the back of the phone.

    • Place a finger beneath the small lip on the left side of the battery.

  2. bLSoGsdgVQHIxKWy
    bLSoGsdgVQHIxKWy
    YCqkhfrHiVFAgrAK

    • Lay the phone down on it's screen.

    • Lift up on the lip and pull the battery from the phone.

  3. XdSQAYKILANK34Tk
    XdSQAYKILANK34Tk
    irKZNA4SxrWFXCOq

    • Remove the four black 3.5mm T5 screws from the back of the phone.

  4. 1MA3HOUUCPpCUgHK
    1MA3HOUUCPpCUgHK
    b2Q6NRRUKRuZpocj

    • Insert the flat end of a spudger between the midframe and the display.

    • Slide the spudger along the seam between the frame and the display.

    • Using the spudger for leverage, carefully pry the midframe away from the display assembly.

    • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

    • As it releases, pull the midframe away from the phone.

    • The volume control tab may fall off during removal. It can be easily reattached.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Luedloff

Member since: 12/04/11

727 Reputation

0 comments