HTC HD2 Camera Replacement

Written By: Sam Luedloff

Comments: 0

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

This guide is one of the longer processes, second only to the Logic Board, or the screen. Have a reasonably long time set aside to complete this guide.

Tools

Step 1

Carefully pull the rear cover from the back of the phone.
Place a finger beneath the small lip on the left side of the battery.

Step 2

Lay the phone down on it's screen.
Lift up on the lip and pull the battery from the phone.

Step 3

Remove the four black 3.5mm T5 screws from the back of the phone.

Step 4

Insert the flat end of a spudger between the midframe and the display.
Slide the spudger along the seam between the frame and the display.
Using the spudger for leverage, carefully pry the midframe away from the display assembly.
This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.
As it releases, pull the midframe away from the phone.
The volume control tab may fall off during removal. It can be easily reattached.

Step 5

Disconnect the flash cable from its socket in the bottom of the motherboard.
Carefully pull the cable from its groove in the frame, working your way back to the camera.