HP Stream 8 Midframe Replacement

Written By: Nick Miller
  • Comments: 1
HP Stream 8 Midframe Replacement

Difficulty

Moderate

Steps

4

Time Required

7 minutes

Introduction

The midframe in an HP contains a power connector/volume board as well as the mid plate bezel. In this guide you will learn how to replace the midframe within a HP stream 8 carefully and swiftly.

  1. 4L5e5wRRLmNFCcUX

    • Use your nail or a spudger to pry the back cover off of the device.

    Hey bro are you have a battery for stream 8

    Kashif joiya -

  2. GcgUwKcNSLW5kPw4

    • Slide your finger around the rest of the back cover, lifting it completely off of the device.

  3. e3CA6xfNbSDX2hCW

    • Remove ten Phillips #00 screws from the inside cover.

  4. GKFySoTtrHCQ2XTN

    • Pry up the inside cover the same way as in the first step.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nick Miller

Member since: 11/04/16

669 Reputation

0 comments