HP Star Wars Special Edition 15-an051dx Keycap Replacement

Written By: Fernando Mendez
  • Comments: 1
HP Star Wars Special Edition 15-an051dx Keycap Replacement

Difficulty

Moderate

Steps

2

Time Required

3 minutes

Introduction

Key Replacement

  • If your HP Star Wars Special Edition 15-an051dx device is not displaying any characters on your screen and overall the keys are unresponsive when typing you will need to replace the keys.
  • This guide will teach you how to properly replace the keys of your HP Star Wars Special Edition 15-an051dx device with quick effective results.
  • Make sure to have at hand new device keys and the tools needed to achieve the results demonstrated in this guide.
  • Ensure you power off your computer completely before beginning.

  1. O2IDvWS2TDj1TuIK
    O2IDvWS2TDj1TuIK
    Qvr24bDnRlryStPJ
    e2Kgb13PtStuZjOV

    • Make sure the computer is fully shut down and unplugged before starting.

    • With the flat end of the pry tool gently place it under the affected key and lift upwards.

  2. xsK2WilHqoGa5OSZ
    xsK2WilHqoGa5OSZ
    wnVdZeDTZlKSNNUs
    GVHodu4pQUsa4WqY

    • When you lift the key make sure not to lift the silicon. It should remain attached to the keyboard.

    • After the key pops off, grab your new key and place it on top of the silicone on the keyboard.

    • With your finger press down on the key until you hear a clicking noise.

Conclusion

Enjoy your new keycaps!

Author

Fernando Mendez

Member since: 25/08/22

643 Reputation

One comment

Very sinple and straight to the point I really like that

RETRO GAMEHEAD -